← Back to Lessons
PHYSICS · CHAPTER 8 · LESSON 8.3

Refraction Through Lenses

Explore converging and diverging lenses, animated ray diagrams, real and virtual images, and magnification through an interactive Lenses laboratory.

FCONVEX LENS

1. What Is a Lens?

A transparent material which can diverge or converge rays of light is called a lens. A lens has at least one curved surface. Generally, lenses are made of glass with two spherical surfaces.

There are two main types: convex (converging) lenses and concave (diverging) lenses. Lenses have different shapes and are used in spectacles, cameras, projectors, telescopes and microscopes. Convex lenses are used as magnifying glasses and to correct long-sightedness; concave lenses are used to correct short-sightedness.

Convex Lens — Converging

Thicker at the centre than at the edges. It converges parallel rays of light.

F

Concave Lens — Diverging

Thinner at the centre than at the edges. It diverges parallel rays of light.

F

2. Six Common Lens Shapes

Figure 8.3 shows three convex lenses; Figure 8.4 shows three concave lenses. Bi-convex and bi-concave lenses are widely used, so they are usually called simply convex and concave lenses.

Figures 8.3–8.4 — Schematic cross-sections of convex and concave lenses

3. Terms in Connection with Lenses

Centres of Curvature and Principal Axis

Each spherical surface has its own centre of curvature. The straight line joining the two centres is the principal axis, passing through the middle of the lens.

Symmetric Lens and Optical Centre

A lens is symmetric when the magnitudes of its two radii of curvature are equal. The optical centre P is the point in the middle of a symmetric lens on the principal axis.

\[|R_1|=|R_2|\]
C₁C₂PPrincipal axis
Figure 8.5 — Terms in connection with lenses (schematic)

4. Principal Focus and Focal Length

Convex Lens — Real Focus

Rays parallel to the principal axis converge at F after passing through a convex lens. Because the rays actually pass through F, this is a real focus. The distance PF is the focal length f.

Figure 8.6 · Real focus

Concave Lens — Virtual Focus

Parallel rays diverge after passing through a concave lens. Their backward extensions appear to meet at F. Since the actual rays do not pass through F, it is a virtual focus. The distance PF is the focal length.

Figure 8.7 · Virtual focus
Each lens has two focal points, one on each side. For a convex lens, parallel rays entering from either side converge at the opposite-side focus. For a concave lens, the virtual focus is on the incident side. Points at twice the focal length are marked 2F (Figure 8.8).

5. Three Principal Rays

Only two principal rays are needed to locate an image. The following three rules apply to thin lenses (Figure 8.9).

Ray 1 · Parallel to Axis

Convex: refracts through the far focus. Concave: diverges as if coming from the near focus.

Ray 2 · Through / Toward Focus

Convex: a ray through the near focus emerges parallel. Concave: a ray directed toward the far focus emerges parallel.

Ray 3 · Through Optical Centre

A ray passing through the optical centre continues in the same direction (thin-lens approximation).

FFFigure 8.9 · Ray construction principles (schematic)

6. Interactive Convex Lens Image Laboratory

Choose the object position. The animated rays and image move automatically. Blue arrows show images; gold arrows show objects. Dashed purple rays indicate virtual backward extensions.

Image positionAt F
Image natureReal · inverted
Relative sizeDiminished
Object positionImage positionNature and sizeApplication

Figure 8.10 (a–f) — Convex lens image formation. Diagram is an interactive thin-lens model, not a scale reproduction of the textbook figures.

7. Image Formation by a Concave Lens

A concave lens forms an image that is always virtual, upright and smaller than the object for a real object. It lies between P and F on the same side of the lens as the object (Figure 8.11). A convex lens can produce real or virtual images, depending on object position. A virtual image formed by either lens approaches the object's size as the object touches the lens.

FPO′I′
Figure 8.11 — Concave lens produces a virtual, upright, diminished image (schematic)

8. Magnification

Magnification m is the ratio of image height II′ to object height OO′. Using the real-positive distance convention of this textbook, magnification is also minus the image distance divided by the object distance.

MAGNIFICATION · EQUATION (8.6)
\[\boxed{m=\frac{II'}{OO'}=-\frac{v}{u}}\tag{8.6}\]

Negative Magnification

m < 0: the image is inverted. If |m| < 1, the image is smaller than the object.

Positive Magnification

m > 0: the image is upright. If |m| > 1, the image is larger than the object.

9. Worked Example 8.3

(i) Convex Lens · Real Image

An object is placed 30 cm from a convex lens of focal length 10 cm. Find the image position and magnification.

Given\[f=+10\text{ cm},\quad u=+30\text{ cm}\]
Lens equation\[\frac1u+\frac1v=\frac1f\]\[\frac1{30}+\frac1v=\frac1{10}\]\[\frac1v=\frac1{10}-\frac1{30}=\frac1{15}\]\[v=+15\text{ cm}\]
Magnification\[m=-\frac vu=-\frac{15}{30}=-0.5\]
Image: 15 cm from the lens, real, inverted and half the object's height.
(ii) Concave Lens · Virtual Image

An object is placed 30 cm from a concave lens of focal length 10 cm. Find the image position and magnification.

Given\[f=-10\text{ cm},\quad u=+30\text{ cm}\]
Lens equation\[\frac1u+\frac1v=\frac1f\]\[\frac1{30}+\frac1v=-\frac1{10}\]\[\frac1v=-\frac1{10}-\frac1{30}=-\frac2{15}\]\[v=-7.5\text{ cm}\]
Magnification\[m=-\frac vu=-\frac{-7.5}{30}=+0.25\]
Image: 7.5 cm from the lens on the object side, virtual, upright and one-quarter of the object's height.

10. Reviewed Exercise

  1. What are the differences between real and virtual images formed by a convex lens?
  2. Draw any two ray diagrams to show how real and virtual images can be formed by a convex lens.

Key Words

Convex LensConcave LensMagnificationErect ImageInverted Image