← Back to Lessons
PHYSICS Ā· CHAPTER 8 Ā· LESSON 8.2

The Lens Equation

Understand how light refracts through two curved surfaces and learn to calculate focal length, object distance and image distance using the thin lens equation.

Convex Lens F

Refraction Through Two Lens Surfaces

Light from a point object O passes through two refracting surfaces S₁ and Sā‚‚. The first surface forms an intermediate image I₁, which acts as the object for the second surface. The second refraction forms the final image I.

O I S₁ Sā‚‚ P n₁ nā‚‚ n₁
Figure 8.2 — Path of light rays from a point object O through a lens to image I (schematic)

Derivation of the Lens Equation

STEP 01 Ā· FIRST REFRACTION AT S₁

For the first refraction at surface S₁:

\[ \frac{n_1}{u_1}+\frac{n_2}{v_1} =\frac{n_2-n_1}{R_1} \tag{i} \]
STEP 02 Ā· SECOND REFRACTION AT Sā‚‚

For the second refraction at surface Sā‚‚:

\[ \frac{n_2}{u_2}+\frac{n_1}{v_2} =\frac{n_1-n_2}{R_2} \tag{ii} \]
STEP 03 Ā· INTERMEDIATE IMAGE AND LENS THICKNESS

The image I₁ formed at the first surface acts as the object for the second surface of the lens. Therefore:

\[ u_2=-v_1+t \]

Here t is the lens thickness. The negative sign is required by the signed-distance relationship between the intermediate image and the second surface.

Since the lens thickness is very small compared with object and image distances, we can neglect t:

\[ \boxed{u_2=-v_1} \]
STEP 04 Ā· COMBINING THE TWO REFRACTIONS

Substituting uā‚‚ = āˆ’v₁ into equation (ii) and combining it with equation (i), we obtain:

\[ \frac{n_1}{u_1}+\frac{n_1}{v_2} =(n_2-n_1) \left(\frac{1}{R_1}-\frac{1}{R_2}\right) \tag{iii} \]
STEP 05 Ā· THE LENS IN AIR

Considering the lens as a single entity, the object distance is u = u₁ and the image distance is v = vā‚‚. If medium 1 is air, n₁ = 1 and nā‚‚ = n.

\[ \boxed{ \frac{1}{u}+\frac{1}{v} =(n-1)\left( \frac{1}{R_1}-\frac{1}{R_2} \right) } \tag{8.3} \]

The Lens-Makers' Equation

The focal length f of a lens is the image distance when the object is at infinity. Substituting u = āˆž and v = f into equation (8.3) gives the lens-makers' equation.

\[ u=\infty,\qquad v=f \] \[ \frac{1}{\infty}=0 \]
LENS-MAKERS' EQUATION Ā· (8.4)
\[ \boxed{ \frac{1}{f} =(n-1)\left( \frac{1}{R_1}-\frac{1}{R_2} \right) } \tag{8.4} \]

Combining equations (8.3) and (8.4), we obtain the general thin lens equation.

THE THIN LENS EQUATION Ā· (8.5)
\[ \boxed{ \frac{1}{u}+\frac{1}{v}=\frac{1}{f} } \tag{8.5} \]
This is the general formula for a thin lens. The object distance u and image distance v are measured from the centre P of the lens. The position and nature of the image can be calculated using the lens formula.

The Sign Convention for the Lens

images formed by lenses may be real or virtual, and erect or inverted. The following sign conventions are used when applying lens formulae.

01 Ā· Real and Virtual Distances

(i) Distances of real object, real image and real focus are positive. Distances of virtual object, virtual image and virtual focus are negative.

02 Ā· Perpendicular Distances

+h āˆ’h

(ii) Perpendicular distance measured above the principal axis is positive, while that measured below the principal axis is negative.

Worked Example 8.2

Example 8.2 Ā· Finding the Focal Length

The radii of curvature of two curved surfaces are 20 cm and 10 cm, as shown in the figure. Find the focal length of a lens whose refractive index is 1.5.

STEP 1 Ā· GIVEN VALUES
\[ n=1.5,\quad R_1=20\text{ cm} \] \[ R_2=-10\text{ cm} \]
STEP 2 Ā· APPLY THE LENS-MAKERS' EQUATION
\[ \frac{1}{f}=(n-1) \left[\frac{1}{R_1}-\frac{1}{R_2}\right] \] \[ \frac{1}{f}=(1.5-1) \left[\frac{1}{20}-\frac{1}{-10}\right] \]
STEP 3 Ā· SIMPLIFY
\[ \frac{1}{f} =0.5\left(\frac{1}{20}+\frac{1}{10}\right) \] \[ \frac{1}{f}=0.075\text{ cm}^{-1} \] \[ f=\frac{1}{0.075} \]
\[ \boxed{f=13.33\text{ cm}} \]
Answer: The focal length of the lens is 13.33 cm.

Reviewed Exercise

Write the lens-makers' equation for a lens which is immersed in water.

For a thin lens immersed in water, the lens-makers' equation uses the refractive index of the lens relative to water.

\[ \boxed{ \frac{1}{f_w} =\left(\frac{n_l}{n_w}-1\right) \left(\frac{1}{R_1}-\frac{1}{R_2}\right) } \]

Here nā‚— is the refractive index of the lens material, n_w is the refractive index of water, and f_w is the focal length in water.

Key Words

Radius of Curvature Focal Length Lens-Makers' Equation